Description

KEBOSOL VD consists of a specific combination of detergent surfactants which have an excellent cleaning efficiency in neutral and alkaline solutions already at very low dosing rates.

    Benefits

    • Emulsifies fatty and oily substances (e.g. residues of antifroth oils) and disperses thin films of dirt.
    • Thus redeposition and adhesion to the heat surfaces are prevented.
    • During chemical cleaning operations in the sugar industry the following advantages have proved a success when adding KEBOSOL VD:
      • The detachment of sugar decomposition products and other inconvenient organic components (e.g. proteins and other gelatinous substances) is considerably improved in alkaline solutions.
      • At alkaline pretreatments calcium compounds (such as calcium sulfate (gypsum), calcium oxalate, calcium silicate a.s.o.) being difficult to dissolve are transformed into acid soluble compounds by adding KEBOSOL VD. As a result the treatment period is shortened.
      • At intermediate cleanings the removal of detached sludge is improved. Consequently the requirement of acid is considerably reduced.

      • During the alkaline aftertreatment the decomposition of acid insoluble silicates and organic substances is intensified and the removal of acid residues is favoured. This is of utmost importance as even small acid residues remaining in the smallest pores may cause serious corrosion.
      • The addition of KEBOSOL VD to alkaline solutions supports the neutralization of acid also in the smallest pores and crazings owing to its good wetting properties.
      • At the final rinsing the removal of residual sludge is improved.
      • KEBOSOL VD is even resistant to high temperatures and effective and can be used for alkali concentrations up to approx. 25 %.

      Dosing, Addition

      The dosing rates amount to:

        • alkaline pretreatment of apparatus with normal contamination (up to 5 % total alkali content) 0.1 - 0.2 %
        • alkaline pretreatment of apparatus with thick contamination (more than 5 % total alkali content)
          0.2 - 0.5 %
        • alkaline aftertreatment/neutralization (up to 2 % total alkali content) 0.1 %


        The duration of treatment depends on the composition and thickness of scales as well as on the application temperature. Detailed instructions for each individual cleaning can be elaborated by us.

          Systems treated with KEBOSOL VD have to be rinsed with water until they are free from residues before the sugar juice will flow again through these tubes.

            Technical data

            Description:slightly yellowish, slightly turbid liquid
            Density at 25°C (g/cm3):approx. 1
            pH-Value (100 g/l water):10.8 – 11.4

            Packing

            PE-cans:     30 kg
            PE-cans:     60 kg
            PE-barrels:   200 kg
            Containers: 1000 kg

            Storage

            In closed original packages KEBOSOL VD is storable for at least two years.
            Protect from frost.

              Notes. References

              In case of proper application KEBOSOL VD complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021). The organic raw materials contained in KEBOSOL VD are exclusively of petrochemical origin and are therefore neither BSE-endangering (bovine spongiform encephalopathy) nor genetically modified.
                Halal certification number: C-790-60-16-XXX
                Kosher Certification No.: 81173637, company number: 0351

                  Your product request. Write to us.

                  The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
                  The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.

                  Talk to us, we will be happy to help!
                  On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.

                  Product
                  Subject
                  Company
                  Title
                  First name
                  Surname
                  Postcode
                  City
                  Country
                  E-Mail
                  Phone
                  Your message