Description

Ensures an optimum protection against corrosion in closed and semi open water systems by a synergistic blend of organic and inorganic inhibitors. Iron, copper and aluminium materials are protected.

    Benefits

    • Contains scale control additives which also at high temperatures prevent calcareous deposits and
    • disperse suspended matter so that the heat transfer surfaces will be kept clean.

    Dosing, Addition

    The product concentration in the circulation water should be 2.000 up to 5.000 g/m3and is dependent on the following factors:
      • neutral salt concentration (chloride/Cl-, sulfate/SO42-)
      • total hardness (alkaline earths)
      • carbonate hardness (HCO3-)
      • max. temperature of the cooling water


      In hard saline waters with a total hardness of more than approx. 20°dH, a carbonate hardness of approx.
      5 mol/m3 (approx. 14°dH), a chloride concentration of approx. 8 mol/m3 (approx. 300 mg Cl/l) and a sulfate concentration of approx. 1 mol/m3 (approx. 100 mg/ SO42-) a product concentration of 5.000 to 10.000 g/m3 is recommended.

        The quantity necessary for each individual case should be determined in cooperation with our Department for Application Technique.

          Technical data

          Description:yellowish liquid
          Density at 25°C (g/cm3):approx. 1.1
          pH-Value (100 g/l water):11.5 – 12.7
          PO43- -Content (%):approx. 0.5
          Solubility in water:in any proportion miscible with water

          Packing

          PE-cans:     30 kg
          PE-cans:     60 kg
          PE-barrels:   200 kg
          Containers: 1000 kg

          Storage

          In closed original packages KEBOCOR 213 is storable for at least 2 years. Protect from freezing.

            Notes. References

            In case of proper application KEBOCOR 213 complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).
              Halal certification number: C-790-60-16-XXX
              Kosher certification number: 81173637, company number: 0351

                  Your product request. Write to us.

                  The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
                  The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.

                  Talk to us, we will be happy to help!
                  On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.

                  Product
                  Subject
                  Company
                  Title
                  First name
                  Surname
                  Postcode
                  City
                  Country
                  E-Mail
                  Phone
                  Your message