EN
Description
KEBOSPUM HTS PL has been formulated for a temperature range from 45° C and higher. Thus it can be used in the following fields:- Raw Juice Area: inlet of cossettes, defoaming systems (e.g. that of the BMAprescalder), pulp press water systems
- Juice Purification: liming tanks, lime milk tanks, carbonatations, decanters
Benefits
- A surface active agent itself the foaming power is extremely low and the product acts by suppressing the foam when being added to liquids which tend to form foam.
- It also has the ability to disperse instantly in the medium to be defoame,
- and quickly reaches the interfaces,
- KEBOSPUM HTS PL, which is formulated from non-ionic surfactants, has a consistently high defoaming capacity in all liquids, regardless of the pH value, the type and concentration of dissolved substances and the different residence times in the sugar juice.
- not steam-volatile.
Dosing, Addition
The necessary dosing quantities can rapidly and easily be determined at site by variation of the pump adjustment. The general requirement will be 10 - 20 ppm with regard to juice.Technical data
| Description: | foaming, colorless to yellowish liquid |
| Density at 25°C (g/cm3): | approx. 1 |
| pH-Value (100 g/l water): | 5 – 7 |
| Viscosity (mPa*s) at 25 °C: | approx. 300 |
Packing
| barrels: | 200 kg |
| container: | 1.000 kg |
Storage
In closed original packages KEBOSPUM HTS PL is storable for at least 2 years. Protect from freezing.Notes. References
In case of proper application KEBOSPUM HTS PL complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).Kosher Certification No.: 81173637, company number: 0351
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.