EN
Description
Developed as universal agent for the control of the foam formation in aqueous systems. It is efficient in the acid up to weakly alkaline pH-range (pH 1-11).
Benefits
- Is easily emulsifiable with water.
- Resistant to acids and weak alkalies.
- KEBOSPUM LF can be used not only in undiluted form but also diluted with water. The optimal application parameters depend on the conditions at site. The following application methods are possible:
- Spraying of the undiluted or diluted antifoam on the foam surface
- Intermittent addition of the undiluted or diluted antifoam into the aqueous solution to destroy an existing foam layer
- Continuous addition, especially to prevent the formation of foam.
Dosing, Addition
As the addition of the antifoam depends on the degree of foam development and the foam resistancy it is not possible to exactly indicate the necessary dosing rates.
In general dosing rates vary from 0.05 to 0.5 % referring to the medium with a tendency to foam. However, considering the large number of reasons for foaming and the different kinds of systems to be defoamed we recommend to determine the most favourable dosing level by tests on your own.
Technical data
| Description: | turbid, milky liquid |
| Density at 25°C (g/cm3): | approx. 1 |
Packing
| PE-cans: | 25 kg |
| PE-barrel: | 190 kg |
Storage
In closed original packages KEBOSPUM LF is storable for at least 2 years. Protect from freezing.
Remark: Separation phenomena which may occur at a longer storage period can be eliminated by stirring without any loss in quality.
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.