EN
Description
Used as a corrosion inhibitor, hardness stabilizer and dispersant in open cooling systems that have low acid capacities (low m-value) and/or low calcium contents (make-up water softening). KEBOCOR 241 consists of a mixture of organic and inorganic compounds that protect steel and copper alloys from corrosion attack, prevent hardness precipitation and disperse dirt particles. The specially formulated inhibitors produce thin, firmly adhering top coats on metal surfaces. Low-molecular polyelectrolytes are responsible for hardness stabilization.Benefits
- Prevents precipitation (in sub-stoichiometric doses) from supersaturated solutions by blocking crystal nucleation.
- Prevents the agglomeration and settling of particles on the walls of the system (the higher molecular weight polymers have dispersing properties, they are preferentially adsorbed on the surface of suspended solids).
- Is compatible with free chlorine (Cl2) as well as non-ionic biocides.
Dosing, Addition
The amount of dosage depends on many parameters and should in any case be agreed with our application technology department.Technical data
| Description: | yellow, clear to slightly muddy liquid |
| Density at 25°C (g/cm3): | approx. 1.4 |
| pH-Value (100 g/l water): | approx. 12 – 13 |
| PO4 Content (%): | approx. 20 |
| Solubility in water: | in any proportion miscible with water |
Packing
| PE-cans: | 35 kg |
| Containers: | 1200 kg |
Storage
KEBOCOR 241 can be stored for at least 2 years in closed original containers.
Protect from temperatures below -10 °C.
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.