Description
A synergistic blend of modified polyacrylic and phosphonic acids not only showing stabilizing but also dispersing features. The product has been optimized particularly with regard to the prevention of formation of scales containing calcium carbonate and calcium sulfate. It is already effective at substoichiometric dosing (THRESHOLD effect) i.e. at quantities not yet being sufficient for the sequestration of alkaline earth ions.
Benefits
- Shows good dispersing properties even at high contents of turbid matter in the water.
- The components of KEBOPLEX 138 specifically attach to the submicroscopic crystal germs present in the supersaturated solutions and stop resp. delay their further growing to larger regular crystals which cause the formation of scales.
Dosing, Addition
The dosing is dependent on various factors such as:
- thermal load of the heat exchanger surfaces
- concentration factor
- retention time
- turbid matter content
Technical data
Description: | colorless to yellowish liquid |
Density at 25°C (g/cm3): | approx. 1.1 |
pH-Value (100 g/l water): | 1.5 – 2.5 |
Phosphorus Content (%): | approx. 1.8 |
Solubility in water: | in any proportion miscible with water |
Packing
PE-cans: | 30 kg |
PE-barrels: | 200 kg |
Containers: | 1000 kg |
Storage
In closed original packages KEBOPLEX 138 is storable for at least 2 years. Protect from freezing.
Notes. References
Because of its anionic character KEBOPLEX 138 should not be applied together with cationic products (e.g. quaternary ammonium compounds).
German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.